The diploma thesis discusses laser cutting of non-ferrous metals using fiber YbYag laser and evaluation of the roughness of cutting edge samples. To manufacture samples of aluminium Al 99,5, deoxidized copper Cu – DHP and brass CuZn37 were used combinations of process parameters according to Taguchi statistical method. Samples were subsequently evaluated, according to the ČSN EN ISO 9013 standard and sorted into roughness cathegories, and by technical and economical evaluation, the most economical process parameter combinations were found. Experimantal part is preceded by description of general methods of cutting, description of laser types, process parameters and their influence on the occurrence of the cutting edge defects and description of roughness measurement and standard ČSN EN ISO 9013.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241860 |
Date | January 2016 |
Creators | Pilarčík, Edmund |
Contributors | Kaván, Martin, Mrňa, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds