Two basic approaches to reduce computational requirements for solving
distillation problems have been studied: simplifications of the model based on
physical approximations and order reduction techniques based on numerical
approximations.
Several problems have been studied using full and reduced-order
techniques along with the following distillation models: Constant Molar
Overflow, Constant Molar Holdup and Time-Dependent Molar Holdup.
Steady-state results show excellent agreement in the profiles obtained using
orthogonal collocation and demonstrate that with an order reduction of up to
54%, reduced-order models yield better results than physically simpler models.
Step responses demonstrate that with a reduction in computing time of the
order of 60% the method still provides better dynamic simulations than those
obtained using physical simplifications. Frequency response data obtained
from pulse tests has been used to verify that reduced-order solutions preserve
the dynamic characteristics of the original full-order system while physical
simplifications do not.
The orthogonal collocation technique is also applied to a coupled columns
scheme with good results. / Graduation date: 1992
Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/36669 |
Date | 12 December 1991 |
Creators | Matandos, Marcio |
Contributors | Levien, Keith L. |
Source Sets | Oregon State University |
Language | en_US |
Detected Language | English |
Type | Thesis/Dissertation |
Page generated in 0.0015 seconds