Non-metallic inclusions in molten steel have received worldwide attention due to their serious influence on both the steel product quality and the steel production process. These inclusions may come from the de-oxidation process, the re-oxidation by air and/or slag due to an entrainment during steel transfer, and so on. The presence of some inclusion types can cause a termination of a casting process by clogging a nozzle. Thus, a good knowledge of the inclusion behavior and deposition rate in steel flows is really important to understand phenomena such as nozzle clogging. In this thesis, inclusion behaviors and deposition rates in steel flows were investigated by using mathematical simulations and validation by experiments. A ladle teeming process was simulated and Ce2O3 inclusion behavior during a teeming stage was studied. A Lagrangian method was used to track the inclusions in a steel flow and to compare the behaviors of inclusions of different sizes. In addition, a statistical analysis was conducted by the use of a stochastic turbulence model to investigate the behaviors of different-sized inclusions in different nozzle regions. The results show that inclusions with a diameter smaller than 20 μm were found to have similar trajectories and velocity distributions in the nozzle. The inertia force and buoyancy force were found to play an important role for the behavior of large-size inclusions or clusters. The statistical analysis results indicate that the region close to the connection region of the straight pipe and the expanding part of the nozzle seems to be very sensitive for an inclusion deposition. In order to know the deposition rate of non-metallic inclusions, an improved Eulerian particle deposition model was developed and subsequently used to predict the deposition rate of inclusions. It accounts for the differences in properties between air and liquid metals and considers Brownian and turbulent diffusion, turbophoresis and thermophoresis as transport mechanisms. A CFD model was firstly built up to obtain the friction velocity caused by a fluid flow. Then, the friction velocity was put into the deposition model to calculate the deposition rate. For the case of inclusion/particle deposition in vertical steel flows, effects on the deposition rate of parameters such as steel flow rate, particle diameter, particle density, wall roughness and temperature gradient near a wall were investigated. The results show that the steel flow rate/friction velocity has a very important influence on the rate of the deposition of large particles, for which turbophoresis is the main deposition mechanism. For small particles, both the wall roughness and thermophoresis have a significant influence on the particle deposition rate. The extended Eulerian model was thereafter used to predict the inclusion deposition rate in a submerged entry nozzle (SEN). Deposition rates of different-size inclusions in the SEN were obtained. The result shows that the steel flow is non-uniform in the SEN of the tundish. This leads to an uneven distribution of the inclusion deposition rates at different locations of the inner wall of the SEN. A large deposition rate was found to occur at the regions near the SEN inlet, the SEN bottom and the upper region of two SEN ports. For the case of an inclusion/particle deposition in horizontal straight channel flows, the deposition rates of particles at different locations of a horizontal straight pipe cross- section were found to be different due to the influence of gravity and buoyancy. For small particles with a small particle relaxation time, the gravity separation is important for their deposition behaviors at high and low parts of the horizontal pipe compared to the turbophoresis. For large particles with a large particle relaxation time, turbophoresis is the dominating deposition mechanism. / <p>QC 20150326</p>
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-161915 |
Date | January 2015 |
Creators | Ni, Peiyuan |
Publisher | KTH, Tillämpad processmetallurgi, Stockholm |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.2057 seconds