Fractures make both opportunities and problems for exploration and production
from hydrocarbon reservoirs. It is always difficult to predict how to optimally produce a
fractured reservoir due to the complexity and heterogeneity of fluid flow paths.
The following behavior is seen in fractured reservoirs: early water breakthroughs,
reduced tertiary recovery efficiency due to channeling of injected gas or fluids, dynamic
calculations of recoverable hydrocarbons that are much less than static mass balance and
dramatic production changes due to changes in reservoir pressure as fractures close down
as conduits. These problems often lead to reduced ultimate recoveries or higher
production costs.
Polymer gels, in particular in-situ gels that can be placed deep into the reservoir,
have been widely used for improved conformance control. In this dissertation, we aim to
block the high-permeability zones, fractures in particular, with the microgels to increase
the sweep efficiency by diverting the waterflood water to the low permeability zones that
still contain unswept oil.
vii
Polyacrylic acid microgels can swell a thousand fold as the pH of the surrounding
solution changes, with an accompanying large increase in viscosity. This pH trigger is
simpler than chemical cross-linking and thus offers operational advantages.
The ability of pH-sensitive polymers to block high permeability fractures is
studied by performing several coreflood and batch experiments. The effect of different
rock and salt minerals, polymer concentration, polymer salinity, and temperature on
polymer performance is studied in this dissertation.
Polymer microgels show excellent consistency in the presence of various salt
minerals and in contact with different rock minerals. The placement of microgels into the
fractures lowered the overall core permeability in all cases. In addition, polymer
microgels were stable after being in reservoir for a month with conditions at 58°C.
Consequently, using pH-triggered polymers for conformance control and reducing
the permeability of high permeability areas in fractured reservoirs merit further
investigations. These polymers are inexpensive and are easy to prepare. The polymer
concentration, salinity and shut-in time could be set according to the desired PRF value,
injectivity, propagation distance and reservoir mineralogy. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2010-12-2516 |
| Date | 09 November 2012 |
| Creators | Lalehrokh, Farshad |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.0016 seconds