Return to search

A Composite Frame/joint Super Element For Structures Strengthened By Externally Bonded Steel/frp Plates

A materially non-linear layered beam super element is developed for the analysis of RC beams and columns strengthened by externally bonded steel/FRP plates. The elasto-plastic behavior of RC member is incorporated by its internally generated or externally supplied moment-curvature diagram. The steel plate is assumed to be
elasto-plastic and the FRP laminate is assumed to behave linearly elastic up to
rupture. The thin epoxy layer between the RC member and the externally bonded lamina is simulated by a special interface element which allows for the changing failure modes from steel plate yielding/FRP plate rupture to separation of the bonded plates as a result of bond failure in the epoxy layer. An empirical failure criterion based on test results is used for the epoxy material of the interface.
The most critical aspect of such applications in real life frame structures is the anchorage conditions at the member ends and junctions. This has direct influence on the success and the effectiveness of the application. Therefore, a special corner piece anchorage element is also considered in the formulation of the joint super
element, which establishes the fixity and continuity conditions at the member ends
and the joints.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/1052547/index.pdf
Date01 January 2003
CreatorsKaymak, Yalcin
ContributorsPolat, Ugur M.
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for public access

Page generated in 0.0018 seconds