Return to search

Dynamics and instability of flexible structures with sliding constraints

Although instabilities and large oscillations are traditionally considered as conditions to be avoided in structures, a new design philosophy based on their exploitation towards the achievement of innovative mechanical features has been initiated in the last decade. In this spirit, instabilities are exploited towards the development of systems that can yield designed responses in the post-critical state. Further, the presence of oscillating constraints may allow for a stabilization of the dynamic response. These subjects entail a rich number of phenomena due to the non-linearity, so that the study of such mechanical systems becomes particularly complex, from both points of view of the mechanical modeling and of the computational tools. Two elastic structures are studied. The first consists of a flexible and extensible rod that is clamped at one end and constrained to slide along a given profile at the other. This feature allows one to study the effect of the axial stiffness of the rod on the tensile buckling of the system and on the compressive restabilization. A very interesting effect is that in a region of parameters double restabilization is found to occur, involving four critical compressive loads. Also, the mechanical system is shown to work as a novel force limiter that does not depend on sacrificial mechanical elements. Further, it is shown that the system can be designed to be multi-stable and suitable for integration in metamaterials. The second analyzed structure is a flexible but inextensible rod that is partially inserted into a movable rigid sliding sleeve which is kept vertical in a gravitational field. The system is analytically solved and numerically and experimentally investigated, when a horizontal sinusoidal input is prescribed at the sliding sleeve. In order to model the system, novel computational tools are developed, implementing the fully nonlinear inextensibility and kinematic constraints. It is shown that the mathematical model of the system agrees with the experimental data. Further, a study of the inclusion of dissipative terms is developed, to show that a steady motion of the rod can be accomplished by tuning the amplitude or the frequency of the sliding sleeve motion, in contrast with the situation in which a complete injection of the rod inside the sleeve occurs. A special discovery is that by slowly decreasing the frequency of the sleeve motion, the length of the rod outside the sleeve can be increased significantly, paving the way to control the rod’s end trajectory through frequency modulation.

Identiferoai:union.ndltd.org:unitn.it/oai:iris.unitn.it:11572/362124
Date22 December 2022
CreatorsKoutsogiannakis, Panagiotis
ContributorsKoutsogiannakis, Panagiotis, Bigoni, Davide, Dal Corso, Francesco
PublisherUniversità degli studi di Trento, place:TRENTO
Source SetsUniversità di Trento
LanguageEnglish
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/openAccess
Relationfirstpage:1, lastpage:119, numberofpages:119

Page generated in 0.0021 seconds