Recently, attention has been drawn to the viability of using S-CO(2) as a working fluid in modern reactor designs. Near the critical point, CO2 has a rapid rise in density allowing a significant reduction in the compressor work of a closed Brayton Cycle. Therefore, 45% efficiency can be achieved at much more moderate temperatures than is optimal for the helium Brayton cycles. An additional benefit of the S-CO2 system is its universal applicability as an indirect secondary Power Conversion System (PCS) coupled to most GEN-IV concept reactors, as well as fusion reactors. The United States DOE's GNEP is now focusing on the liquid Na cooled primary as an alternative to conventional Rankine steam cycles. This primary would also benefit from being coupled to an S-CO2 PCS. Despite current progress on designing the S-CO2 PCS, little work has focused on the principal supporting systems required. Many of the required auxiliary systems are similar to those used in other nuclear or fossil-fired units; others have specialized requirements when CO2 is used as the working fluid, and are therefore given attention in this thesis. Auxiliary systems analyzed within this thesis are restricted to those specific to using CO2 as the working fluid. Particular systems discussed include Coolant Make-up and Storage, Coolant Purification, and Coolant Leak Detection. / Contract number: N62271-97-G-0026. / US Navy (USN) author
| Identifer | oai:union.ndltd.org:nps.edu/oai:calhoun.nps.edu:10945/2992 |
| Date | 09 1900 |
| Creators | Freas, Rosemarv M. |
| Contributors | Massachusetts Institute of Technology. |
| Publisher | Cambridge Massachusetts Institute of Technology |
| Source Sets | Naval Postgraduate School |
| Detected Language | English |
| Type | Thesis |
| Format | 151 p. : ill. (chiefly col.) ;, application/pdf |
| Rights | Approved for public release, distribution unlimited |
Page generated in 0.0121 seconds