Single phase and boiling batch water targets are the most common designs for the cyclotron production of 18F via the 18O(p,n)18F reaction. Thermosyphon targets have design and operating characteristics which enables higher power operation than conventional boiling targets of like size. Experiments and calculations were performed in order to characterize the performance of a 1.3 cc tantalum [18F]Target. The test target led to the development of a variety of computational techniques as well as experimental methods that will be used in future target design and optimization. Computational methods include several applications of Monte Carlo Radiation Transport as well as Finite Element Analysis. In addition, experimental thermal hydraulic and radiochemical analyses were performed.
Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-03112007-123110 |
Date | 26 March 2007 |
Creators | Stokely, Matthew Hughes |
Contributors | M. Shearer, G. Bida, B. Wieland, J. Michael Doster, M. Bourham |
Publisher | NCSU |
Source Sets | North Carolina State University |
Language | English |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://www.lib.ncsu.edu/theses/available/etd-03112007-123110/ |
Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0022 seconds