Return to search

An experimental device for critical surface characterization of YBCO tape superconductors / Experimental device for critical surface characterization of yttrium barium copper oxide tape superconductors

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2013. / Cataloged from PDF version of thesis. / Includes bibliographical references (p. 81-83). / The twisting stacked tape cabling (TSTC) method for YBCO superconductors is very attractive for high current density, high magnetic field applications, such as nuclear fusion reactors and high energy physics experiments. Industrial scale assembling methods have been proposed, and cable samples have been tested at 77 K and 4.2 K. A new experimental device has been designed and built to measure critical current of YBCO tapes and TSTC as a function of magnetic field and temperature. The probe allows controlling the temperature between 4.2 K and 80 K within +/-1 K in liquid and gaseous helium ambient, and can be used in a 2 T magnet facility at MIT-PSFC and a 14 T magnet facility at NHMFL-FSU. Its current leads are designed to carry up to 5 kA. The device consists in a 0.9 m long, 25 x 38 mm rectangular vacuum-insulated canister. The superconducting sample and a superconducting current return lead fit inside the canister, in such a way that the Lorentz force and torque produced by the external magnetic field is cancelled. The sample temperature is controlled in a 200 mm long area inside the canister where critical current measurements are performed. Critical current measurements were performed on a single YBCO tape at self-field at temperatures between 20 K and 70 K. The results are similar to data provided by the superconductor's manufacturer. The temperature reached the set point in approximately 10 minutes, and was controlled within +/-1 K. Results of heating power required and difference between set point temperature and measured temperature as functions of set point temperature are presented for two temperature control methods. / by Franco Julio Mangiarotti. / S.M.

Identiferoai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/80663
Date January 2013
CreatorsMangiarotti, Franco Julio
ContributorsJoseph V. Minervini., Massachusetts Institute of Technology. Department of Nuclear Science and Engineering., Massachusetts Institute of Technology. Department of Nuclear Science and Engineering.
PublisherMassachusetts Institute of Technology
Source SetsM.I.T. Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format83 p., application/pdf
RightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582

Page generated in 0.0021 seconds