Diffraction Enhanced Imaging (DEI) with x-ray radiation provided by a synchrotron source has been shown to provide good image contrast at lower radiation dose for materials with small x-ray attenuation coefficient As a result, DEI has received significant interest for digital mammography and other medical imaging applications. However, deployment of a synchrotron source at a medical facility is not currently feasible due to its size and costs. Consequently, a compact x-ray source capable of delivering x-ray intensities and beam collimation similar to a synchrotron accelerator is desirable. A wide beam area x-ray source has been suggested as a possible alternative to a synchrotron source, with the x-rays generated by electron bombardment of a suitable target material. Previous research work demonstrated a prototype scale cylindrical shaped oxygen free copper target with a layer of molybdenum to be feasible from an engineering perspective. An industrial size DEI facility requires a scale-up of the proof-of-principle design. The x-ray flux necessary for high image quality implies significant heat loading on the x-ray source. Safe operation of a full scale DEI facility is reliant upon a thermal management solution capable of rejecting this heat. An active target cooling system has been proposed and its performance has been evaluated through CFD simulation. The design ensures the maximum target temperature is maintained at reasonable levels and coolant boiling is not reached under the most demanding operating conditions.
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-03092009-180052 |
| Date | 13 March 2009 |
| Creators | Bobolea, Nicolae Alin |
| Contributors | J. Michael Doster, K. Linga Murty, Mohamed A. Bourham |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-03092009-180052/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0399 seconds