The purpose of this thesis is to design a robust test facility for a small space nuclear power system and model its physical behavior under different scenarios. The test facility will be used to simulate a 1-10kWe nuclear reactor, its electrical generation, and heat removal capabilities. This simulator will be used to explore, test and understand the steady-state and transient operation capabilities of small space nuclear power systems. Currently, the system is planned to operate on a variable, electrical heat source directly connected to heat pipes. The heat pipes are to be stainless steel with a water working fluid. These heat pipes will then be connected to a power conversion simulator or actual power conversion technologies. The power conversion simulator is connected to a radiator using a water based heat pipe network using fins and connecting plates in a cylindrical geometry.
Modeling of the facility was performed using two different analysis programs, STELLA and SolidWorks. STELLA was used as a lumped sum heat transport code, and SolidWorks was used as a more accurate system to verify the validity of STELLA's results. Both programs were used to analyze startup, heat pipe failures, and loss of power
conversion with the end goal of finding safe operational transient scenarios for the transient test facility. / Graduation date: 2013
| Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/38011 |
| Date | 20 March 2013 |
| Creators | Wheeler, Adam (Adam Richard) |
| Contributors | Klein, Andrew |
| Source Sets | Oregon State University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis/Dissertation |
Page generated in 0.002 seconds