Return to search

Atmospheric Plasma Characterization and Mechanisms of Substrate Surface Modification

The purpose of this research has been to characterize the parameters of an Atmospheric Plasma Device used for surface modifications and functionalization of textile materials. Device parameters are determined in absence and presence of a substrate to quantify the optimal operational conditions. Neutral gas temperature profiles were determined for a variety of gas mixtures including 100% helium and helium with 1 or 2% reactive gases, such as oxygen and carbontetrafluoride. A plasma model was developed to solve for other plasma parameters including the electron-neutral collision frequency and the electron number density. Wool substrates were treated with various gas mixtures for a range of exposure durations and the effects of plasma treatment on weight, surface-functionality, and strength were assessed. Assessment methods include percent weight change calculations, energy dispersive X-ray spectroscopy (EDS), and tensile testing. In addition, cellulosic paper was exposed to 1% oxygen plasma to determine the feasibility of permanently grafting the anti-microbial agent HTCC (quaternized ammonium chitosan). The success of the bond was tested using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), colorimetry, and percent weight change, and the permanency of the bond was tested though soxhlet extraction.

Identiferoai:union.ndltd.org:NCSU/oai:NCSU:etd-11092006-175630
Date08 December 2006
CreatorsCornelius, Carrie Elizabeth Ms.
ContributorsMohamed Bourham, Orlando Hankins, Marian McCord
PublisherNCSU
Source SetsNorth Carolina State University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://www.lib.ncsu.edu/theses/available/etd-11092006-175630/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0162 seconds