Return to search

Numerical modelling of Langmuir probe measurements for the Swarm spacecraft

This work studies the current collected by the spherical Langmuir probes to be mounted on the ESA Swarm satellites in order to quantify deviations from idealized cases caused by non-ideal probe geometry. The finite-element particle-in-cell code SPIS is used to model the current collection of a realistic probe, including the support structures, for two ionospheric plasma conditions with and without drift velocity. SPIS simulations are verified by comparing simulations of an ideal sphere at rest to previous numerical results by Laframboise parametrized to sufficient accuracy. It is found that for probe potentials much above the equivalent electron temperature, the deviations from ideal geometry decrease the current by up to 25 % compared to the ideal sphere case and thus must be corrected if data from this part of the probe curve has to be used for plasma density derivations. In comparison to the non-drifting case, including a plasma ram flow increases the current for probe potentials around and below the equivalent ion energy, as the contribution of the ions to the shielding is reduced by their high flow energy.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-148633
Date January 2011
CreatorsChiaretta, Marco
PublisherUppsala universitet, Rymd- och plasmafysik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationFYSAST

Page generated in 0.0017 seconds