In 2012, mandatory effluent quality standards were established in Canada as part of the Wastewater Systems Effluent Regulations (WSER) with compliance deadlines starting in 2020. Maintaining the treatment process efficacy to meet these new stringent discharge regulations is extremely challenging at treatment facilities that treat wastewater from multiple industries due to the high variation in the composition of the incoming feed to the process. In this work, application of two new analytical tools, PeCOD® and Liquid Chromatography-Organic Carbon Detection (LC-OCD), for measurement and characterization of industrial wastewater organic pollution respectively, has been investigated.
Organic pollution is commonly measured as Chemical Oxygen Demand via the dichromate method (CODCr) which requires 2-3 hours to complete. Thus this method is not suitable for applications that require rapid and frequent pollution monitoring. The Photoelectrochemical Oxygen Demand (peCOD) is an alternative parameter of organic pollution that can be measured in approximately 15 minutes via a method that utilizes the high oxidation potential of UV-irradiated TiO2 nano-particulates. Herein peCOD suitability to replace CODCr for analysis of industrial wastewater was investigated. The results indicated that for both untreated (i.e. incoming) and treated (i.e. effluent) industrial wastewater samples, peCOD results are lower than CODCr results. However, for the effluent samples, the two methods’ results are strongly correlated. Containing hard to oxidize materials (i.e. macromolecules) and high concentrations of chloride and
nitrogenous compounds were identified as potential causes of difference between the results of the two methods.
When there is variation in the composition of the incoming wastewater to a treatment process, information about the wastewater composition is required for process optimization. Thus optimization cannot be based solely on bulk measurements of organic pollution (e.g. COD). In this study, a novel combination of LC-OCD analysis with Design-Of-Experiments (DOE) methods was used to optimize the Fenton Advanced Oxidation (AO) treatment conditions in terms of chemical reagent concentrations, to develop statistical models of the process, and to identify potential mechanisms of COD removal. / Thesis / Master of Applied Science (MASc) / Many industrial facilities do not treat their wastewater on-site and instead ship it to specialized treatment facilities. Ensuring that the treated effluent meets the stringent discharge regulations is a challenging task for such facilities as the composition of the incoming feed to the treatment process changes with each shipment. In this work, application of two new analytical tools, PeCOD® and Liquid Chromatography-Organic Carbon Detection (LC-OCD), for measurement and characterization of industrial wastewater organic pollution respectively, has been investigated.
The conventional method of measuring organic pollution, Chemical Oxygen Demand (COD), requires 2-3 hours to complete. Herein the suitability of an alternative parameter, Photoelectrochemical Oxygen Demand (peCOD), that can be measured in approximately 15 minutes for replacing COD analysis in industrial wastewater plants was investigated.
Implementation of effective treatment processes that are operated at their optimum conditions is required to meet the stringent discharge regulations. Advanced Oxidation (AO) is an effective method of industrial wastewater treatment. Herein, optimum AO treatment conditions were studied via application of the LC-OCD analysis for organic pollution characterization.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/21242 |
| Date | January 2017 |
| Creators | Aghasadeghi, Kimia |
| Contributors | Latulippe, David, Chemical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0022 seconds