ln the last several years, considerable attention has been paid to the study of dispersion-flattened single-mode fibers which offer a high transmission capacity with low losses through a wide range of wavelengths. However, the existing designs are sensitive to bending and manufacturing tolerances, and are not truly single-mode at most wavelengths of interest.
To remedy these problems a new series of broadband dispersion-flattened truly single-mode fiber designs are proposed. These fibers have both dispersion-shifted and dispersion-flattened features with low splice and bend losses. Results demonstrating a total dispersion of ±0.97 ps/km-nm over the entire spectral range between 1.31 μm to 1.66 μm are presented. Such dispersion-flattening is achieved while simultaneously maintaining a mode-field radius of 3 μm to 5 μm in the dispersion-flattened wavelength range. The most significant achievement is that the proposed muIti-clad fiber design is strictly single-mode and splice and bend losses are smaller than those of double-clad, triple-clad, and quadruple-clad fibers with the same value of dispersion.
Ultralow dispersion fibers, whose chromatic dispersion and the first and second-order derivatives of the chromatic dispersion are zero at 1.5 μm or 1.55 μm, are described. This effectively increases the laser emission tolerance. Ultralow dispersion fibers open the way to wavelength multiplexing with currently available inexpensive multifrequency lasers, either in local or long distance networks. These fibers also have low splice and bend losses compared to double-clad, triple-clad, and quadruple-cIad fibers.
An inverse waveguide synthesis program, which can trace multiple objective functions and optimize multiple parameters simultaneously, is developed. An objective function is applied, for the first time, to optimize the dispersion-flattened single-mode fiber index profile with respect to: (1) minimum dispersion, (2) the wavelengths of zero-dispersion, (3) maximum width of dispersion-flattened window, (4) maximum layer index difference less than 0.8%, and (5) layer thickness larger than 3.5 μm.
The accuracy of chromatic dispersion calculations in dispersion-flattened fibers is evaluated. lt has been shown that the accuracy of approximate methods is influenced not only by the index differences, but also by their derivatives with respect to wavelength.
The matrix method and direct numerical integration of the wave equation are used to compute the mode propagation constants, cutoff frequencies, field distributions, mode-field radius, and splice loss, and carry out production tolerance analysis for multi-clad step-index fibers and graded-index fibers, respectively. Detailed analysis and optimized fiber data are presented. / Ph. D.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/54390 |
| Date | January 1989 |
| Creators | Lu, Liang-Ju |
| Contributors | Electrical Engineering, Besieris, Ioannis M., Jacobs, Ira, Prather, Carl, Claus, Richard O., Safaai-Jazi, A. |
| Publisher | Virginia Polytechnic Institute and State University |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | en_US |
| Detected Language | English |
| Type | Dissertation, Text |
| Format | xi, 142 leaves, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 21708557 |
Page generated in 0.002 seconds