Oblique weirs are those weirs placed at an angle with respect to the channel centerline. They can be used in canal applications where more discharge is needed, but there is limited freeboard. The discharge coefficients were determined for 54 different weirs by measuring total head for various flows over each weir. These weirs included sharp, half round and quarter-round-crested weirs. There were 18 weirs for each crest shape with three weir heights for each angle tested. The oblique angles tested were 10°, 15°, 25°, 45°, 60°, and 90° with respect to the channel centerline, with the nominal weir heights being 4, 8, and 12 inches. The half-round-crested weirs were the most efficient, followed by the quarter-round-crested weirs and the sharp-crested weirs were the least efficient. By decreasing the oblique angle, the weir length became longer and the weir would be more efficient than the normal weir.
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-1999 |
| Date | 01 August 2011 |
| Creators | Tingey, Samuel Egnew |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0015 seconds