Shape plays an important role in our everyday life to interpret information about the surroundings whether we are aware or not. Together with visual and auditory information, we are able to obtain and process information for different purposes. Output devices such as monitors and speakers convey visual and auditory information while input devices such as touch screen and microphones receive that information for human machine interaction. Such devices have become commonplace but there has yet to be a fitting input/output device utilizing our haptic perception.
Digital Clay is a next generation Human Machine Interface (HMI) device for 2.5D shape input/output via an array of hydraulic actuators. This device potentially has wide applications in the areas of engineering, sciences, medicine, military, entertainment etc. The user can perceive the shape of a computer programmed model in a tangible and concrete manner which means an added realism with the addition of the sense of touch. Conversely, the user can also use Digital Clay as an input device to the computer, by shaping and molding desired shapes on the device, no longer limited to drawing models with a mouse on CAD software.
Shape display has been achieved with the current 5x5 prototype at the Georgia Institute of Technology but this research seeks to expand its capability to include haptic feedback and consequently shaping mode. This thesis gives an overview of the current 5x5 prototype and implements 2 commonly used haptic control methods, the admittance control and the impedance control. For implementing the admittance control, actuator displacement and velocity controllers and a proportional integral observer (PIO) are designed. The model-based unknown input observer is a solution for force estimation without added sensors in the actuators. For implementing the impedance control, a novel pressure control technique is designed to provide pressure feedback to the actuators array along with accurate and reliable displacement measurement. Both of the haptic control methods are evaluated, hardware and software limitations are outlined and possible future improvements are suggested.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/31842 |
| Date | 17 November 2009 |
| Creators | Ngoo, Cheng Shu |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0022 seconds