Pore geometry and topology are important determinants of sediment physical properties, such as porosity and permeability. They also influence processes that occur in the sediment, such as acoustic propagation, attenuation, and dispersion, single- and multi-phase fluid flow, and hydrodynamic dispersion. This study uses images to evaluate pore geometry and topology of ooid (subspherical particles) and siliclastic (angular quartz) sand that was collected from the marine environment south of Bimni Bahamas and Ft. Walton Beach, FL, respectively. Image analysis techniques and predictive tools enable insight into the relationships among sediment pore geometry, topology, and physical properties for these differently shaped sands. High frequency acoustics utilize short wavelength signals to evaluate sediments. Correspondingly short length scales are then needed for sedimentary property predictions, which is possible with planar and volumetric image analysis of sand. This data was compared to data obtained by direct large scale measurements (e.g., water weight loss, constant head permeability) were made. Mean porosity differed by as much as 0.04 and mean permeability showed good agreement and differed by a factor of 2. Given that the image analysis predictions were made from much smaller samples (~equivalent to the length scale of the high acoustic frequencies used) than the bulk samples, a sediment characterization at acoustically relevant length scales is possible. It was also demonstrated that for these homogeneous sands (i.e., ooids and quartz) two-dimensional pore geometry and topology are quite similar to three-dimensional pore geometry and topology (i.e., pore connectivity). Additionally it was determined that pore network models typically overestimate the topology and therefore, in order to match image and bulk predictions of sediment properties, these models must underestimate the conductance of individual pore throats (i.e., conductive element in sand). Typically pore throats are depicted as straight cylinders. Image data suggests that pore throats are better represented by biconical shapes where conductance is as much as 3 times higher than conductance within the straight cylinders. These findings indicate that increased realism in pore throat shape (higher conductivity) and in topology (fewer pore throats) may significantly influence network model evaluations of fluid flow or acoustic propagation in marine sand.
| Identifer | oai:union.ndltd.org:LSU/oai:etd.lsu.edu:etd-04162004-073552 |
| Date | 16 April 2004 |
| Creators | Reed, Allen Hagerman |
| Contributors | Samuel Jackson Bentley, Sr., Robert Romaire, Jaye Ellen Cable, Jeff Nunn, Clinton S. Willson, Lawrence J. Rouse, Jr., Michael D. Richardson |
| Publisher | LSU |
| Source Sets | Louisiana State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lsu.edu/docs/available/etd-04162004-073552/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to LSU or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0132 seconds