California Polytechnic State University, San Luis Obispo is currently working towards developing a Computational Fluid Dynamics (CFD) database for future code validation efforts. Cal Poly will complete a wind tunnel test on the Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA) in the National Full-Scale Aerodynamics Complex (NFAC) 40 foot by 80 foot wind tunnel at NASA Ames Research Center in the summer of 2011. The development of two measurement techniques is discussed in this work, both with the objective of making measurements on AMELIA for CFD validation.
First, the work on the application of the Fringe-Imaging Skin Friction (FISF) technique to AMELIA is discussed. The FISF technique measures the skin friction magnitude and direction by applying oil droplets on a surface, exposing them to flow, measuring their thickness, and correlating their thickness to the local skin friction. The technique has the unique ability to obtain global skin friction measurements. A two foot, nickel plated, blended wing section test article has been manufactured specifically for FISF. The model is illuminated with mercury vapor lamps and imaged with a Canon 50D with a 546 nm bandpass filter. Various tests are applied to the wing in order to further characterize uncertainties related with the FISF technique. Human repeatability has uncertainties of ±2.3% of fringe spacing and ±2.0° in skin friction vector direction, while image post processing yields ±25% variation in skin friction coefficient. A method for measuring photogrammetry uncertainty is developed. The effect of filter variation and test repeatability was found to be negligible. A validation against a Preston tube was found to have 1.8% accuracy.
Second, the validation of a micro flow measurement device is investigated. Anemometers have always had limited capability in making near wall measurements, driving the design of new devices capable of measurements with increased wall proximity. Utilizing a thermocouple boundary layer rake, wall measurements within 0.0025 inches of the surface have been made. A Cross Correlation Rake (CCR) has the advantage of not requiring calibration but obtaining the same proximity and resolution as the thermocouple boundary layer rake. The flow device utilizes time of flight measurements computed via cross correlation to calculate wall velocity profiles. The CCR was designed to be applied to AMELIA to measure flow velocities above a flap in a transonic flow regime. The validation of the CCR was unsuccessful. Due to the fragile construction of the CCR, only one data point at 0.10589 inches from the surface was available for validation. The subsonic wind tunnel’s variable frequency drive generated noise which could not be filtered or shielded, requiring the use of a flow bench for validation testing. Since velocity measurements could not be made in the flow bench, a comparison of a fast and slow velocity was made. The CCR was not able to detect the difference between the two flow velocities. Currently, the CCR cannot be applied on AMELIA due to the unsuccessfully validation of the device.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-1387 |
| Date | 01 August 2010 |
| Creators | Ehrmann, Robert S |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses |
Page generated in 0.0133 seconds