The research reported in this doctoral thesis involves constructing physiochemical models that reproduce the transport behaviour of aqueous chemical species present in environments relevant to the oil and gas industry to gain an improved insight into the local electrochemistry near the electroactive surface (uniform corrosion) or inside the pit (pitting corrosion). The first part of the project involved constructing physiochemical models with one dimensional geometry with aqueous chemical species and chemical and electrochemical processes observed in oxygen (O2) containing brine environments to determine the changes in the local electrolyte composition and the potential within an initiated pit for a variety of external physical and chemical conditions. It was determined that the bottom of the pit suffers greatly from the effects of iR drop (Ohmic drop) if the pit geometry is taken to be macroscopic. The model was extended to include additional aqueous chemical species in conjunction with the chemical and electrochemical processes observed in carbon dioxide (CO2) rich environment to investigate the effects of CO2 on the local electrolyte chemistry at the bottom of the pit. It was found that the proton reduction electrochemical process on its own was incapable of supplying the high currents experimentally measured in CO2 environments via the buffering effect. The second part of the project was to investigate the influence of different experimental conditions on the polarisation behaviour of near static carbon steels in CO2 saturated brine electrolyte via multiple electrochemical measurement techniques. The key observation from this study was the presence of two distinct mass transport limited regions on the cathodic polarisation curve at natural pH (3.775). From the physiochemical model fitted to the experimental cathodic curve, the first mass transport limited region, occurring at lower cathodic potentials, was identified to be the direct reduction of carbonic acid while the second wave, occurring at slightly higher cathodic potentials, was shown to be the direct reduction of aqueous carbon dioxide. Based on the polarisation scans under forced convection, the rate of the direct reduction of carbon dioxide was determined to be under neither potential nor mass transport control. The third part of the project involved extending the existing one dimensional models to include the precipitation of salt films (iron chloride â FeCl2(s) and iron carbonate â FeCO3(s)) in O2 and CO2 saturated brine electrolyte respectively along with the capability to track their respective thickness. Furthermore, the ability of the underlying metal to undergo a change in its state from active to passive is implemented in the model via a set of rules based on the Pourbaix diagram. It was determined that the precipitation of salt films is greatly influenced by the mass transport with no or minimal thickness observed under even natural convection conditions. Furthermore the successful precipitation of salt film was determined to be a precursor step to the metal attaining passivation.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:756817 |
| Date | January 2017 |
| Creators | Sanadhya, Sanskar |
| Contributors | Stevens, Nicholas |
| Publisher | University of Manchester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://www.research.manchester.ac.uk/portal/en/theses/modelling-of-corrosion-electrochemistry-in-sweet-environments-relevant-to-oil-and-gas-operations(f3771ec2-1a7b-4315-9a91-9ed8af5de1fa).html |
Page generated in 0.0149 seconds