Return to search

Mechanical behavior of concentric and eccentric casing, cement, and formation using analytical and numerical methods

The first main goal of this research is to develop comprehensive analytical and numerical models for the stress distribution around an inclined cased wellbore by considering all wellbore processes and to amend erroneous models of most previous work. The second main goal is to apply the developed models to explain near wellbore phenomena such as cement failure and sand production. To achieve these goals, this work checked the eligibility of using simple elastic approaches for the system by using a poroelastic undrained condition and a steady state condition for stresses induced by wellbore temperature variation. It utilized the generalized plane strain to compensate for the limitation of the plane strain which most previous work had used. In addition, this research developed comprehensive models to improve previous work by using superposing principles. For applying the developed models to cement failure, Mogi-Coulomb criterion for shear failure instead of Mohr-Coulomb and Drucker-Prager criteria was used to properly consider the intermediate stress. Additionally, ABAQUSr was utilized for numerical models with the "model change" option to simulate and combine all individual wellbore processes while MATLABr was used for analytical models. For predicting sand production, fully coupled poroelastic solutions for an inclined open wellbore were modified to obtain the stress distribution around a perforation tunnel after perforating. Then, modified Lade failure criterion was used to calculate the critical drawdown when sand production occurs, that is, when the perforation tunnel starts failure. This research obtained the following results. For developing models, the analytical models improved the previous research. However, the numerical results under a vertical tectonic stress showed discrepancies because of the difference between the generalized plane strain and numerical models. For cement failure, Young's modulus of cement, wellbore pressure and wellbore temperature variation could affect shear failure more significantly than the other factors. The numerical results showed closer to the failure envelopes than the analytical results. For predicting sand production, well completion affected sand production near wellbore and the critical drawdown converged to asymptotic values. In addition, perforating along the minimum horizontal stress direction was most preferable in a vertical cased wellbore under a normal stress regime. / text

Identiferoai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/18066
Date27 September 2012
CreatorsJo, Hyunil, 1977-
Source SetsUniversity of Texas
LanguageEnglish
Detected LanguageEnglish
Formatelectronic
RightsCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.

Page generated in 0.0016 seconds