The thesis deals with the design and construction of headstocks of a turning centre. The aim is to design a spindle with an output of 20 kW and a maximum speed of 5000 1/min. The research part of the thesis is focused on the description of the basic parameters of the headstock and turning centres needed for the construction of the headstock and contains an analysis of the available spindles on the market. The next part of the thesis deals with the selection and calculation of cutting conditions and the necessary parameters. Analytical calculations are then verified using FEM analysis. At the end of the thesis, a 3D model was developed and headstock drawing documentation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443734 |
Date | January 2021 |
Creators | Sovadina, František |
Contributors | Marek, Tomáš, Pavlík, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds