Trends toward increased integration and miniaturization of optical system components have created pressure to consolidate widely disparate analog and digital functions onto fewer and fewer chips with a goal of eventually built into a single mixed-signal chip. Yet, because of those performance requirements, the frontend circuit has traditionally used III-V compound semiconductor technologies, but the low-level of integration with other digital ICs limits the sustainability of such end products for short-distance applications. On the other hand, their CMOS counter parts, despite having such advantages as low power consumption, high yield that lowers the cost of fabrication, and a higher degree of integration, have not performed well enough to survive in such a noisy environment without sacrificing other important attributes.
In this research, a high-speed CMOS preamplifier was designed and fabricated through TSMC 0.18/spl mu/m mixed-signal non-epi CMOS technology, and a 20/spl mu/m diameter InGaAs thin-film Inverted-MSM photodetector with a responsivity of 0.15A/W at a wavelength of 1550/spl mu/m was post-integrated onto the circuit. The circuit has a overall transimpedance gain of 60dB/spl Omega/, and bit-error-rate data and eye-diagram measurement results taken as high as 10Gbit/s are reported in this dissertation.
Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/4902 |
Date | 24 November 2004 |
Creators | Song, Indal |
Publisher | Georgia Institute of Technology |
Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
Language | en_US |
Detected Language | English |
Type | Dissertation |
Format | 29080273 bytes, application/pdf |
Page generated in 0.0016 seconds