A large spectrum of new technologies are being explored in the optical disk drive systems. Optics, lasers, media, and servomechanisms are a few examples. This thesis will be directed to the study of a servomechanism used in a majority of the optical disk drives, commonly referred to as the tracking servomechanism. The tracking servomechanism, consisting of a fine and a coarse actuator, is mechanically analyzed by the use of free body diagrams. A transfer function for each actuator is derived. Analog compensators are designed to achieve specific phase and gain margin requirements. A digital compensator is derived from the analog compensator by the use of a mapping technique. Major contributions of this thesis include studies to determine an acceptable sampling rate, number of bits, and computation delay associated with the implementation of a digital servo controller in a tracking servomechanism.
Identifer | oai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/276564 |
Date | January 1987 |
Creators | Kadlec, Ronald James, 1960- |
Contributors | Sundareshan, M. K. |
Publisher | The University of Arizona. |
Source Sets | University of Arizona |
Language | en_US |
Detected Language | English |
Type | text, Thesis-Reproduction (electronic) |
Rights | Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author. |
Page generated in 0.0052 seconds