The main topic of this Diploma thesis is the application of low-pressure low-temperature hydrogen plasma for the treatment model samples of rusted brass. Plasmachemical treatment of metallic artifacts is a relatively new way how to remove corrosion of artifacts. The temperature of an object should not exceed 150 °C during the treatment. Corrosion layers were prepared in an ammoniac corrosion atmosphere. The corrosion formation took two weeks. Energy Dispersive X-ray Microanalysis has shown that the corrosion layer was formed by carbon, oxygen, copper, zinc, and lead. The corrosion layers were blue-colored with white crystals on the surface. Except those two colors, brown color was observed on corrosion layers, too. The plasma reactor was a quartz tube with outer copper electrodes and supplied by the RF source of 13.54 MHz. The reactive atomic hydrogen was formed in plasma discharge. This atomic hydrogen reacted with the corrosive layer containing oxygen. This reaction created an unstable OH radical, which emitted light in the region of 305–320 nm. This radiation was detected by the optical emission spectroscopy and it was applied as process monitoring quantity. Rotational temperature and intensity of OH radicals were determined from obtained data. The sample temperature was measured by thermocouple installed inside the sample volume. Rusted samples were treated by low-pressure low-temperature hydrogen plasma. 16 samples were treated at different conditions – plasma power was 100 W, 200 W, 300 W, and 400 W at continuous mode and pulse mode with duty cycle of 25 %, 50 %, and 75 %. The pressure was between 140–160 Pa at hydrogen flow rate of 50 sccm. Samples after plasmachemical treatment were grey colored with white crystals on their surface. Corrosion layers were removed by spatula. The corrosion layers of some samples were easy removable, some others were difficult. Energy Dispersive X-ray Microanalysis, which was carried out after the treatment of 2 selected samples (400 W, 50% pulse mode and 400 W, 75% pulse mode), showed different amounts of carbon, oxygen, copper, zinc, and lead compared to the rusted sample. Other elements in the treated layer were silicon, sulfur, chlorine, and fluorine.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216684 |
| Date | January 2011 |
| Creators | Řádková, Lucie |
| Contributors | Grossmannová, Hana, Krčma, František |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds