The use of optical fiber sensors is increasing widely in industry, civil, medicine, defense and research. Among different categories of these sensors is the Extrinsic Fabry-Perot interferometer (EFPI) sensor which is inherently simple and requires only modest amount of interface electronics. These advantages make it suitable for many practical applications. Investigating a cost-effective, reliable and repeatable method for optical fiber sensor fabrication is challenging work. In this thesis, a system for controlled fabrication of Fabry-Perot optical fiber sensors is developed and presented as the first attempt for the long-term goal of automated EFPI sensor fabrication. The sensor fabrication control system presented here implements a real-time control of a carbon dioxide (CO₂) laser as sensor bonding power, an optical fiber white light interferometric subsystem for real-time monitoring and measurement of the air gap separation in the Fabry-Perot sensor probe, and real-time control of a piezoelectric (PZT) motion subsystem for sensor alignment. The design of optoelectronic hardware and computer software is included. A large number of sensors are fabricated using this system and are tested under high temperature and high pressure. This system as a prototype system shows the potential in automated sensor fabrication. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/10033 |
Date | 14 July 2000 |
Creators | Huo, Wei |
Contributors | Electrical and Computer Engineering, Wang, Anbo, May, Russell G., Woerner, Brian D. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis |
Format | ETD, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | edt.pdf |
Page generated in 0.0015 seconds