Return to search

Microcavidades ópticas à base de silício: projeto, confecção e propriedades / Silicon based optical microcavities: project, construction and properties

Estruturas fotônicas à base de silício têm despertado grande interesse por permitirem uma perfeita integração entre processos ópticos e eletrônicos em um único chip. Além de compatíveis com a atual indústria microeletrônica, acredita-se, que tais estruturas possam aumentar consideravelmente a velocidade de processamento de informações. Uma microcavidade óptica é um exemplo de estrutura fotônica simples. Feita à base de silício, e dopada com íons terra-rara, tal microcavidade pode intensificar a emissão gerada pelo íon e resultar em um dispositivo de importância tecnológica. O projeto-construção deste tipo de microcavidade deve considerar a sua região de funcionamento e os materiais a serem utilizados. Deve contemplar, ainda, algumas condições externas que, eventualmente, possam alterar o seu funcionamento. Uma dessas condições é descrita pelo chamado coeficiente termo-óptico que indica a dependência do índice de refração com a temperatura. Dentro desse contexto a presente Tese de Doutorado foi dedicada ao estudo de microcavidades ópticas com janelas de transmissão em 650 nm e em 1550 nm – correspondendo às regiões de menores perdas de fibras ópticas de plástico e de sílica. As microcavidades compreenderam espelhos de Bragg [camadas alternadas de silício amorfo (a-Si) e nitreto de silício amorfo (a-SiN)], um filme de a-SiN como espaçador, e foram depositadas sobre substratos de sílica pela técnica de sputtering. As cavidades MC-Er e MC-ErYb tiveram como espaçadores filmes de a-SiN dopados com Er e Er + Yb, respectivamente. Medidas de fotoluminescência da MC-ErYb na região do infravermelho próximo indicaram um aumento de 48 vezes na emissão dos íons Er3+ (em ~1535 nm) comparado a um filme de a-SiN dopado com érbio devido: (1) a presença do itérbio e, (2) às múltiplas reflexões sofridas pela luz nos espelhos de Bragg. As microcavidades cujos espaçadores eram a-SiN puro foram submetidas a medidas de transmissão óptica em função da temperatura de medida. O deslocamento da janela de transmissão devido às variações de temperatura permitiu determinar o valor do TOC do a-SiN como: (6.2±0.1)×10-5 ºC-1 (em ~ 620 nm) e, (4.7±0.1)×10-5 ºC -1 (em ~ 1510 nm). Até onde sabemos, o TOC do a-SiN no VIS foi determinado pela primeira vez neste trabalho. / Silicon photonic based structures have attracted great interest for allowing a perfect integration between optical and electronic process in a single chip. Besides being compatible with the actual microelectronic industry, it is believed that such structures can considerably increase the information processing speed. An optical microcavity is an example of a simple photonic structure. Made based on silicon, and doped with rare-earth ions, such microcavity may enhance the emission generated by the ion and become a device of technological importance. The project-construction of this kind of microcavity has to consider the operation region and the materials used. It still has to take into account external conditions that may, eventually, change its operation. One of these conditions is described by the thermo-optic coefficient (TOC) that shows the dependence of the refractive index with the temperature. Within this context the present PhD thesis was dedicated to the study of optical microcavities with transmission windows at 650 nm and at 1550 nm – corresponding to the low losses regions of the plastic and silica optical fibers. The microcavities comprised Bragg mirrors [alternated layers of amorphous silicon (a-Si) and amorphous silicon nitride (a-SiN)], one film of a-SiN as spacer, and were deposited on silica substrates by the sputtering technique. The MC-Er and MC-ErYb cavities had Er and Er+Yb-doped a-SiN films as spacers, respectively. Photoluminescence measurements of the MC-ErYb in the near infrared showed an enhancement of 48 times in the emission of the Er3+ ions (at ~ 1535 nm) compared with an Er-doped a-SiN film owing to: (1) the presence of ytterbium and, (2) the multiple reflections experienced by the light at the Bragg mirrors. The microcavities whose spacers were pure a-SiN were submitted to optical transmission measurements as a function of the measurement temperature. The shift of the transmission window due to variations in the temperature allowed determining the a-SiN TOC: (6.2±0.1)×10-5 ºC-1 (at ~ 620 nm) and, (4.7±0.1)×10-5 ºC -1 (at ~ 1510 nm). To the best of our knowledge, the a-SiN TOC in the visible was determined for the first time in this work.

Identiferoai:union.ndltd.org:usp.br/oai:teses.usp.br:tde-21102014-093430
Date26 September 2014
CreatorsGallo, Ivan Braga
ContributorsZanatta, Antonio Ricardo
PublisherBiblioteca Digitais de Teses e Dissertações da USP
Source SetsUniversidade de São Paulo
LanguagePortuguese
Detected LanguagePortuguese
TypeTese de Doutorado
Formatapplication/pdf
RightsLiberar o conteúdo para acesso público.

Page generated in 0.0086 seconds