Organic semiconductors are widely studied as potential active components for consumer electronics due largely to their easily tuned properties and the promise of lower-cost solution-based processing technology. Imide-functionalized organic small molecule compounds have been one of the more important and studied organic semiconductors. However, very few imide-functionalized conjugated polymers have been reported in the literature. The body of this dissertation focuses on the synthesis, structure-property and device studies of imide-functionalized conjugated polymers. Reasons for choosing arylene imides as polymer building blocks include: a) they impart low-lying LUMOs to polymers, allowing band-gap engineering through choice of comonomers with variable electron-donating ability; b) imide-nitrogens provide points to attach side chains to manipulate solubility and solid-state packing; c) they are easily prepared. Structure-property studies include electrochemical measurements, UV-Vis absorption spectroscopy, differential scanning calorimetry (DSC), x-ray diffraction, and in some cases evaluation as active components in field-effect transistors (OFETs) and photovoltaic devices (PVDs).
The published method to synthesize 3,6-dibromo-pyromellitic bisimides (PMBI) was streamlined and poly(phenylene ethynylene)s (PPEs) with variable band gaps were prepared from them (Chapter 2). As noted in all the chapters, electrochemical and optical measurements reveal that the LUMO of the polymers is indeed dictated by the arylene imide, while the HOMO, and therefore the optical energy gap is controlled through varying the electron donor monomer. Intramolecular hydrogen bonding was employed for increasing backbone coplanarity and therefore the polymer could have higher conjugation. One of these polymers demonstrated the narrowest band gap (1.50 eV) for any published PPE.
Chapter 3 describes the first published conjugated copolymers from naphthalene bisimides (NBI), here using thiophene-based comonomers as donor units. Polymers with high molecular weight and decent solubility were obtained by choosing appropriate side chains. The optical energy gaps could be tuned across the visible and into the near IR. Preliminary OFET studies revealed electron mobility as high as ~0.01 cm2/Vs. One low band gap polymer provided OFETs with electron mobility of ~0.04 cm2/Vs and hole mobility of ~0.003 cm2/Vs, which is also among the highest mobilities of ambipolar polymeric semiconductors.
Using the same approach as in Chapter 3, phthalimide-based monomers were incorporated into polymer backbones for developing new high performance p-type polymer semiconductors for OFETs and PVDs (Chapter 4). Some analogues based on benzothiadiazole, PMBI, and thiophene imides as acceptors were prepared for comparison. Again, high molecular weight, soluble polymers with band gaps spanning the visible and into the near IR were obtained. OFETs from one of the polymers yielded hole mobility ~0.3 cm2/Vs under ambient atmosphere without post-processing thermal annealing, which places it squarely within the state-of-the-art for conjugated polymers. Due to the high mobility and low band gap, this polymer also leads to PVDs with moderately good power conversion efficiency (PCE: ~2%).
| Identifer | oai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:gradschool_diss-1751 |
| Date | 01 January 2009 |
| Creators | Guo, Xugang |
| Publisher | UKnowledge |
| Source Sets | University of Kentucky |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | University of Kentucky Doctoral Dissertations |
Page generated in 0.0025 seconds