This thesis deals with the temperature-moisture assessment of members in truss with above-rafter thermal insulation. Within this system it focuses on the details of creating a roof overhang because that is where the timber elements are under the greatest amount of moisture stress. Different variations of this detail are presented including the extent to which thermo-technical requirements and requirements surrounding the built-in timber elements are satisfied. Theoretical calculations are then compared with measurements which were performed on a real building. This task of measurement involved developing a new measuring device. The development of this device is also described in this paper.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:226670 |
| Date | January 2014 |
| Creators | Soudek, Pavel |
| Contributors | Vlach, František, Kalousek, Lubor |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds