The diploma thesis deals with the optimization of final position of overlaps on a forged cam. This part is manufactured in Šroubárna Kyjov, spol. s r.o. The cam is made from ČSN 14 109 (100Cr6) steel. The thesis is focused on the optimization of overlaps arising due to pressed burrs on the edges of the semifinished forging. Currently, the final position of these overlaps is very close to the edge of the pre-forged hole of the cam. Undesired chipping of material occurs during machining of the hole to the exact dimension. The final position of the overlaps is optimized by using the numerical simulation in Simufact Forming 15.0, including a verification simulation for optimal parameter settings. Various diameters of semifinished products, turned tools, and modification of shapes of the tools are tested in the thesis to prevent occurrence of the overlaps in undesired positions.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:416622 |
| Date | January 2020 |
| Creators | Kopečný, Adam |
| Contributors | Lidmila, Zdeněk, Řiháček, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds