This masters’s thesis contains literary research about basic shaping methods of ceramic materials concerning the slip casting method. In addition, stabilization of ceramic slips, drying of ceramic green bodies and their subsequent sintering are described. This thesis also includes a description of plasma technology, including DCBD (Diffuse Coplanar Barrier Discharge) technology. In experimental part of this thesis the Al2O3 powder was treated with DCBD technology. From the prepared powder, the green body was prepared by the slip casting method, which was subsequently sintered by one-step and two-step sintering. The thesis describes the methods of preparation of ceramic samples and their evaluation. Evaluated experiments have shown that plasma technology has a positive effect on the treatment of ceramic powder Al2O3. Alumina ceramic samples of high relative density ( 99%) and low grain size (
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:319621 |
| Date | January 2017 |
| Creators | Rolek, Ondřej |
| Contributors | Kachlík, Martin, Pouchlý, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds