The diploma thesis of the master's study in the field of M2I-K presents a design of a hollow rotating part made of metal sheet with a tapering bottom. Deep drawing technology was chosen as the best suited option for production without thinning the wall. Stainless steel was chosen as a source material for production parts in compliance to ČSN 172 40. The drinker is produced by three drawing operations where each operation is performed separately on a standalone press CTH 250 developed by ŽĎAS a. s. A sheet measuring 1500 x 3000 x 1 mm with diameter 428 mm was evaluated as the most economically viable for production of a semi-finished product – rondel. For one year production produced in a series of annual volume 100,000 pieces.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417132 |
| Date | January 2020 |
| Creators | Vašíček, Jan |
| Contributors | Dvořák, Milan, Císařová, Michaela |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds