Yes / To investigate the heat partition on a vehicle disc brake, a small scale test rig with one contact interface was used. This allowed the disc/pad contact temperatures to be measured with fast-response foil thermocouples and a rubbing thermocouple. Based on the experimental conditions a 3D symmetric disc brake FE model has been created. Frictional heat generation was modelled using the ABAQUS finite element analysis software. The interface tribo-layer which affects heat partitioning was modelled using an equivalent thermal conductance value obtained from the authors¿ previous work. A 10 second drag braking was simulated and the history and distribution of temperature, heat flux multiplied by the nodal contact area, heat flux leaving the surface and contact pressure was recorded. Test rig and FE model temperatures were compared to evaluate the two methods. Results show that heat partitioning varies in space and time, and at the same time contact interface temperatures do not match. It is affected by the instantaneous contact pressure distribution, which tends to be higher on the pad leading edge at the inner radius side. They are also affected by the thermal contact resistance at the components contact interface. / IMechE
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/4413 |
| Date | 06 1900 |
| Creators | Loizou, Andreas, Qi, Hong Sheng, Day, Andrew J. |
| Publisher | Scientific Society of Mechanical Engineering (GTE) |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Conference paper, Published version |
| Rights | © 2010 Loizou, A., Qi, H. S. and Day, A. J. Reproduced by permission from the copyright holders., Unspecified |
| Relation | http://www.fisita.com/education/congress/sc10/fisita2010scp26.pdf |
Page generated in 0.0021 seconds