This thesis focuses on the design and evaluation of the meander-line antenna geometry. One standard meander-line antenna and other two non-standard meander antennas have been studied. These printed antennas are discussed with the goal of identifying which is suitable for use in a miniaturized wireless transceiver design and which is able to provide the better performance using minimal Printed Circuit Board (PCB) space. In a word, the main objective is to characterize tradeoffs and identify which antenna provides the best compromise among volume, bandwidth and efficiency. The performance of each antenna is evaluated based on return loss, operational bandwidth, and radiation pattern characteristics. During our measurement, return loss is measured by reading the S11-port reflection coefficient on Vector Network Analyzer (VNA). This coefficient can be used to characterize how well the antenna is able to be efficiently fed. Operational bandwidth is measured as the frequency range over which the antenna keeps the value of Voltage Standing Wave Ratio (VSWR) or equivalently has -10dB return loss. Ansoft High Frequency Structure Simulator (HFSS) is used to simulate expected characteristics which are resonant frequency, bandwidth, VSWR, and radiation pattern. HFSS is used to provide a good guide for the antenna design before the actual prototype is manufactured. Simulated results are compared with results of measurement to point out the differences and help demonstrate the practical effects on antenna performance. Radiation pattern are measured to illustrate the effects of antenna miniaturization. All the above measurements are done in the anechoic chamber.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hig-6444 |
Date | January 2010 |
Creators | Deng, Kai, Ma, Minjie |
Publisher | Högskolan i Gävle, Högskolan i Gävle, Institutionen för teknik och byggd miljö, Högskolan i Gävle, Ämnesavdelningen för elektronik, Högskolan i Gävle, Högskolan i Gävle, Institutionen för teknik och byggd miljö, Högskolan i Gävle, Ämnesavdelningen för elektronik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/masterThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0016 seconds