In this thesis, a digital-PID-control single-inductor triple-output (SITO) DC-DC converter is realized in AMS 0.35mum CMOS technology. The size of the chip is about 1600 mum x 1700 mum. To improve load current and reduce cross regulation, a Pre-Sub-Period inductor-current regulation is proposed. Based on the maximum duty cycle limiter, an adaptive inductor current adjustment is realized when the duty cycle of the digital PWM signal is larger than the set maximum duty cycle. By an optimized phase control sequence, the S&H stages of the feedback switching and ADC are controlled to on/off with a minimized delay time. Moreover, the control sequence can virtually remove the setting time. / Multiple voltage supplies are necessary to satisfy the different voltage supply requirements of the different on-chip blocks to reduce power consumption in modem electronic devices, such as the modem embedded systems, the portable devices, personal computing devices and wireless communications and imaging systems. For example, WiMAX transmitter includes different sub-blocks: Baseband processor, IQ modulator and power amplifier. Different blocks should operate with the different power supply voltages to satisfy the different requirements. / Single-input multiple-output DC-DC converter is presented to provide the different voltage supplies and reduce the cost on the elements such as the inductor on PCB and save PCB area. Meanwhile, to remove cross regulation and improve load driving capability, the DC-DC converter should operate in the pseudo-continuous mode/discontinuous mode (P-CCM/DCM). However, in the previous designs, the DC current in the inductor is fixed. When the load becomes heavy enough, cross regulation will significantly affect across the different sub-converters. / Jia, Jingbin. / "December 2009." / Adviser: KaNang Leung Alex. / Source: Dissertation Abstracts International, Volume: 72-01, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2010. / Includes bibliographical references (leaves 121-124). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. Ann Arbor, MI : ProQuest Information and Learning Company, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. Ann Arbor, MI : ProQuest Information and Learning Company, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese.
Identifer | oai:union.ndltd.org:cuhk.edu.hk/oai:cuhk-dr:cuhk_344478 |
Date | January 2010 |
Contributors | Jia, Jingbin., Chinese University of Hong Kong Graduate School. Division of Electronic Engineering. |
Source Sets | The Chinese University of Hong Kong |
Language | English, Chinese |
Detected Language | English |
Type | Text, theses |
Format | electronic resource, microform, microfiche, 1 online resource (x, 124 leaves : ill.) |
Rights | Use of this resource is governed by the terms and conditions of the Creative Commons “Attribution-NonCommercial-NoDerivatives 4.0 International” License (http://creativecommons.org/licenses/by-nc-nd/4.0/) |
Page generated in 0.0011 seconds