This theses deals with flow of two immisible fluid in horizontal pipeline. First part teoretically describes immisible flow. What follows is experimental measurement in wich experimental track was adjusted for inlet of oil from the top. Water and corn germ oil were used as fluids. There were observed many modes of flow on the track. After that PIV was described and measured. PIV was done for measurement of values of velocity vectors. Simulation of one chosen mode was developed in the last chapter. This simulation was done in Ansys Fluent with help of VOF method. Simulation was done both in 3D and 2D pipeline. In the end these simulation were compared with experiment measurement and were critically evaluated.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444285 |
Date | January 2021 |
Creators | Lunda, Filip |
Contributors | Pochylý, František, Fialová, Simona |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds