Small size, light weight, high efficacy, longer lifetime and controllable output are the main advantages of high-frequency electronic ballasts for gas discharge lamps. However, power line quality and electromagnetic interference (EMI) issues arise when a simple peak rectifying circuit is used. To suppress harmonic currents and improve power factor, input-current-shaping (ICS) or power-factor-correction (PFC) techniques are necessary.
This dissertation addresses advanced high-frequency electronic ballasting techniques by using a single-stage PFC approach. The proposed techniques include single-stage boost-derived PFC electronic ballasts with voltage-divider-rectifier front ends, single-stage PFC electronic ballasts with wide range dimming controls, single-stage charge-pump PFC electronic ballasts with lamp voltage feedback, and self-oscillating single-stage PFC electronic ballasts.
Single-stage boost-derived PFC electronic ballasts with voltage-divider-rectifier front ends are developed to solve the problem imposed by the high boost conversion ratio required by commonly used boost-derived PFC electronic ballast. Two circuit implementations are proposed, analyzed and verified by experimental results.
Due to the interaction between the PFC stage and the inverter stage, extremely high bus-voltage stress may exist during dimming operation. To reduce the bus voltage and achieve a wide-range dimming control, a novel PFC electronic ballast with asymmetrical duty-ratio control is proposed. Experimental results show that wide stable dimming operation is achieved with constant switching frequency.
Charge-pump (CP) PFC techniques utilize a high-frequency current source (CS) or voltage source (VS) or both to charge and discharge the so-called charge-pump capacitor in order to achieve PFC. The bulky DCM boost inductor is eliminated so that this family of PFC circuits has the potential for low cost and small size. A family of CPPFC electronic ballasts is investigated. A novel VSCS-CPPFC electronic ballast with lamp-voltage feedback is proposed to reduce the bus-voltage stress. This family of CPPFC electronic ballasts are implemented and evaluated, and verified by experimental results.
To further reduce the cost and size, a self-oscillating technique is applied to the CPPFC electronic ballast. Novel winding voltage modulation and current injection concepts are proposed to modulate the switching frequency. Experimental results show that the self-oscillating CS-CPPFC electronic ballast with current injection offers a more cost-effective solution for non-dimming electronic ballast applications. / Ph. D.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/25978 |
Date | 10 January 2002 |
Creators | Tao, Fengfeng |
Contributors | Electrical and Computer Engineering, Lee, Fred C., van Wyk, Jacobus Daniel, Nelson, Douglas J., Huang, Alex Q., Lai, Jih-Sheng, Chen, Dan Y. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Dissertation |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | ETD.pdf |
Page generated in 0.0021 seconds