Cellular networks in Africa have grown exponentially over the past 10 years and their data centres (DCs) on average consume 3 MW of electrical power. They require a reliable electrical power supply and can have a downtime loss of over a million dollars per hour. Power quality, reliability and availability have emerged as key issues for the successful operation of a data centre.
Investigations are carried out into emerging technologies and their application in data centre power distribution systems for cellular networks in Africa. Best practices are applied to develop a power distribution system (PDS) with the objective of achieving optimal reliability and availability.
Analytical techniques are applied to determine and compare the reliability and availability of various power systems. Minimal cut set simulations identify system weak points and confirm component selection. Components’ inherent characteristics (CIC) and system connectivity topology (SCT) are key factors in the improvement of data centre availability.
The analysis practices can be used by engineers and managers as a basis for informed decision making in determining power system reliability and the availability of an existing or a new data centre design. Weak points in the PDS of a data centre causing downtime are identified through analysis, and accurate solutions can be determined to prevent or minimise downtime.
System connectivity topology (SCT) techniques were identified that could increase the reliability and availability of data centres for cellular networks in Africa. These techniques include multiple incomers from the utility company, redundancy levels of critical equipment and parallel distribution paths.
Two case studies were carried out on data centres for a cellular network, one in Nigeria and one in Cameroon. The reliability and availability of both data centres was improved, with substantial reduction in downtime per year.
The outcome of the case studies shows the importance of designing and implementing the power distribution system with sufficient levels of redundancy for critical equipment, and parallel distribution paths. / MSc (Engineering Sciences in Nuclear Engineering), North-West University, Potchefstroom Campus, 2014
Identifer | oai:union.ndltd.org:NWUBOLOKA1/oai:dspace.nwu.ac.za:10394/15587 |
Date | January 2014 |
Creators | Strydom, Leon Petrus |
Source Sets | North-West University |
Language | English |
Detected Language | English |
Type | Thesis |
Page generated in 0.0018 seconds