This diploma thesis deals with a practical comparison of pressure vessels design approaches within ČSN EN 13445. The thesis aimed to design the device using various approaches described in the European Standard and compare them. For the design was chosen a liquid filter, which works as the first stage of the filtration system in a waste-to-energy plant. In the first part of the thesis is introduced to different routes of design by analysis (DBA), including a description of plasticity conditions and finite element types. These theoretical knowledge are applied in the practical part. The practical part consists of designs of the pressure vessel according to different approaches and methods. The first approach is a design by formulae (DBF), which was done in software Visual Vessel Design. The second approach is DBA. This method of design can be realized according to the European Standard by two routes, either by Method base on the stress categories or so-called Direct Route. Both routes were performed in this work. Stress analyzes were made in programs ANSYS Workbench and NozzlePRO. At the end of the thesis, there is a comparison of used approaches and the resulting values of the design.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:416664 |
Date | January 2020 |
Creators | Procházka, Tomáš |
Contributors | Pernica, Marek, Lošák, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0035 seconds