With the rise of high frequency communication systems such as 5G, new types of antennas has to be developed in order to meet the new requirements. In recent years, lens antennas made of periodic structures has been shown to have desirable performance when increasing operational frequency without increasing the size of the antennas. One way of manufacturing the lenses for the antennas are with 3D printers loaded with dielectrics with specified permittivity. This project group studied the process of designing and manufacturing a flat Maxwell fish eye lens at 5 GHz with a bandwidth of 3.5 GHz to 6 GHz. The resulting design is a lens based on a periodic configuration of cuboid unit cells made from dielectrics which consisted of a hole. By choosing the ratio of dielectric and holes in the unit cells, each part of the lens could be tuned to achieve a specific effective refractive index required for realising the Maxwell fish eye lens.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-254262 |
| Date | January 2019 |
| Creators | Lin, Valentine, Sayed Hamad, Tarek |
| Publisher | KTH, Skolan för elektroteknik och datavetenskap (EECS) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | TRITA-EECS-EX ; 2019:149 |
Page generated in 0.0015 seconds