Return to search

Membrane Electrode Assemblies Based on Hydrocarbon Ionomers and New Catalyst Supports for PEM Fuel Cells

The proton exchange membrane fuel cell (PEMFC) is a potential electrochemicalpower device for vehicles, auxiliary power units and small-scale power plants. In themembrane electrode assembly (MEA), which is the core of the PEMFC single cell,oxygen in air and hydrogen electrochemically react on separate sides of a membraneand electrical energy is generated. The main challenges of the technology are associatedwith cost and lifetime. To meet these demands, firstly, the component expensesought to be reduced. Secondly, enabling system operation at elevated temperatures,i.e. up to 120 °C, would decrease the complexity of the system and subsequentlyresult in decreased system cost. These aspects and the demand for sufficientlifetime are the strong motives for development of new materials in the field.In this thesis, MEAs based on alternative materials are investigatedwith focus on hydrocarbon proton-conducting polymers, i.e. ionomers, and newcatalyst supports. The materials are evaluated by electrochemical methods, such ascyclic voltammetry, polarisation and impedance measurements; morphological studiesare also undertaken. The choice of ionomers, used in the porous electrodes andmembrane, is crucial in the development of high-performing stable MEAs for dynamicoperating conditions. The MEAs are optimised in terms of electrode compositionand preparation, as these parameters influence the electrode structure andthus the MEA performance. The successfully developed MEAs, based on the hydrocarbonionomer sulfonated polysulfone (sPSU), show promising fuel cell performancein a wide temperature range. Yet, these membranes induce mass-transportlimitations in the electrodes, resulting in deteriorated MEA performance. Further,the structure of the hydrated membranes is examined by nuclear magnetic resonancecryoporometry, revealing a relation between water domain size distributionand mechanical stability of the sPSU membranes. The sPSU electrodes possessproperties similar to those of the Nafion electrode, resulting in high fuel cell performancewhen combined with a high-performing membrane. Also, new catalystsupports are investigated; composite electrodes, in which deposition of platinum(Pt) onto titanium dioxide reduces the direct contact between Pt and carbon, showpromising performance and ex-situ stability. Use of graphitised carbon as catalystsupport improves the electrode stability as revealed by a fuel cell degradation study.The thesis reveals the importance of a precise MEA developmentstrategy, involving a broad methodology for investigating new materials both as integratedMEAs and as separate components. As the MEA components and processesinteract, a holistic approach is required to enable successful design of newMEAs and ultimately development of high-performing low-cost PEMFC systems. / QC 20100922

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-9208
Date January 2008
Creatorsvon Kraemer, Sophie
PublisherKTH, Tillämpad elektrokemi, Stockholm : KTH
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTrita-CHE-Report, 1654-1081 ; 2008:64

Page generated in 0.0019 seconds