Return to search

Characterization of Ti2AlC coatings deposited with High Velocity Oxy-Fuel and Magnetron Sputtering Techniques

This Thesis presents two different deposition techniques for the synthesis of Ti2AlC coatings. First, I have fabricated Ti2AlC coatings by high velocity oxy-fuel (HVOF) spraying. Analysis with scanning electron microscopy (SEM) show dense coatings with thicknesses of ~150 µm when spraying with a MAXTHAL 211TM Ti2AlC powder of size ~38 µm in an H2/O2 gas flow. The films showed good adhesion to stainless steel substrates as determined by bending tests and the hardness was 3-5 GPa. X-ray diffraction (XRD) detected minority phases of Ti3AlC2, TiC, and AlxTiy alloys. The use of a larger powder size of 56 µm resulted in an increased amount of cracks and delaminations in the coatings. This was explained by less melted material, which is needed as a binding material. Second, magnetron sputtering of thin films was performed with a MAXTHAL 211TM Ti2AlC compound target. Depositions were made at substrate temperatures between ambient and 1000 °C. Elastic recoil detection analysis (ERDA) shows that the films exhibit a C composition between 42 and 52 at% which differs from the nominal composition of 25 at% for the Ti2AlC-target. The Al content, in turn, depends on the substrate temperature as Al is likely to start to evaporate around 700 °C. Co-sputtering with Ti target at a temperature of 700 °C, however, yielded Ti2AlC films with only minority contents of TiC. Thus, the addition of Ti is suggested to have two beneficial roles of balancing out excess of C and to retain Al by providing for more stoichiometric Ti2AlC synthesis conditions. Transmission electron microscopy and X-ray pole figures show that the Ti2AlC grains grow in two preferred orientations; epitaxial Ti2AlC (0001) // Al2O3 (0001) and with 37° tilted basal planes of Ti2AlC (101̅7) // Al2O3 (0001). / Report code: LIU-TEK-LIC-2008:15.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-11422
Date January 2008
CreatorsFrodelius, Jenny
PublisherLinköpings universitet, Tunnfilmsfysik, Linköpings universitet, Tekniska högskolan, Institutionen för fysik, kemi och biologi
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeLicentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationLinköping Studies in Science and Technology. Thesis, 0280-7971 ; 1357

Page generated in 0.0021 seconds