Diabetes is a leading cause of death and disability in the United States. Diabetes requires a lifetime medical treatment. Some diabetes drugs could be taken orally, while others require daily injection or inhalation to maximize bioavailability and minimize toxicity. Parenteral delivery is a group of delivery routes which bypass human gastrointestinal track. Among all the parenteral methods, we chose subcutaneous implant based on its fast act and high patient compliance. When using subcutaneous implant, drug release needs to be strictly controlled. There are three major groups of controlled release methods. Solvent controlled system is already used as osmotic implant. Matrix controlled system is used in Zoladex® implant to treat cancer. Membrane controlled systems is widely used in coating tablets, but not that popular as an implant. Based on the research reported by previous scientists, we decided to build a hybrid system using both matrix and membrane control to delivery human insulin and other small molecule drugs. Subcutaneous environment is different from human GI track. It has less tolerance for external materials so many polymers cannot be used. From the FDA safe excipient database, we selected albumin as our primary polymer and gelatin as secondary choice. In our preliminary insulin diffusion study, we successfully found that insulin mixed with albumin provided a slower diffusion rate compared with control. In addition, we added zinc chloride, a metal salt that can precipitate albumin. The insulin diffusion rate is further reduced. The preliminary study proved that matrix control using albumin is definitely feasible and we might add zinc chloride as another factor. In order to fabricate an implant with appropriate size, we use lyophilisation technology to produce uniformly mixed matrix. Apart from albumin and human insulin, we added sucrose as protectant and plasticizer. The fine powder after freeze-dry was pressed as a form of tablet. The tablets were sealed in Falcon® cell culture insert. Cell culture insert provide a cylinder shape and 0.3 cm2 surface area for drug release. Insulin release study provided a zero order kinetics from prototypes with zinc chloride or 0.4 micron pore size membrane. Caffeine was used as a model drug to investigate the releasing mechanism. Three pore size membranes (0.4, 3 and 8 micron) were tested with same formulation. While 0.4 micron prototypes provided the slowest release, 3 micron ones surprisingly released caffeine faster than 8 micron implants. We calculated the porosity with pore size and concluded that the percentage of open area on a membrane is the key point to control caffeine release. 0.4 micron membranes were used for future research. We increased the percentage of albumin in our excipient, and achieved a slower caffeine release. However, the zero order release could only last for 3 days. After we replaced sucrose with gelatin, a 5 day zero order release of caffeine was achieved. With all the results, we proposed our “Three Phase” drug release mechanism controlled by both membrane and matrix. Seven other small molecule drugs were tested using our prototype. Cloudy suspension was observed with slightly soluble drugs. We updated our “Three Phase” drug release mechanism with the influence of drug solubility. Data shows that releasing rate with same formulation and membrane follows the solubility in pH 7.4. This result proves that our prototype might be used for different drugs based on their solubility. Finally, with all the information of our prototype, we decided to build a “smart insulin implant” with dose adjustment. We proposed an electrical controlled implant with different porosity membranes. Solenoid was used as the mechanical arm to control membrane porosity. 3-D printing technology was used to produce the first real prototype of our implant. Finally, insulin implant with clinically effective insulin release rate was achieved. / Pharmaceutical Sciences
| Identifer | oai:union.ndltd.org:TEMPLE/oai:scholarshare.temple.edu:20.500.12613/4098 |
| Date | January 2017 |
| Creators | Zhi, Kaining |
| Contributors | Lebo, David, Fassihi, Reza, Ilies, Marc A., Blass, Benjamin E., Ofner, Clyde M. |
| Publisher | Temple University. Libraries |
| Source Sets | Temple University |
| Language | English |
| Detected Language | English |
| Type | Thesis/Dissertation, Text |
| Format | 179 pages |
| Rights | IN COPYRIGHT- This Rights Statement can be used for an Item that is in copyright. Using this statement implies that the organization making this Item available has determined that the Item is in copyright and either is the rights-holder, has obtained permission from the rights-holder(s) to make their Work(s) available, or makes the Item available under an exception or limitation to copyright (including Fair Use) that entitles it to make the Item available., http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | http://dx.doi.org/10.34944/dspace/4080, Theses and Dissertations |
Page generated in 0.0041 seconds