Aluminosilicate refractory grog are being manufactured by firing refractory clays, claystone and shale. Firing takes place mainly in rotary or blast furnaces. However, when adjusting the raw material before firing in blast furnaces, the formation of the fine clay particles takes place. It is not possible to fire the fine particles in blast furnaces the usual way, which leads to the generation of waste. There is a possibility, however, to form briquettes of these particles, which can be fired in blast furnaces. This solution also brings the possibility of adjusting the mixture by using correction raw materials or other types of clay. Using this method, it is possible to produce a special refractory grog with specific properties.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:265475 |
| Date | January 2017 |
| Creators | Konečný, Martin |
| Contributors | Tvrdík,, Lukáš, Nevřivová, Lenka |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds