This master thesis is focused on design of control stick grip and rudder pedals extension. These components are equipped with active elements, which provide pilot with haptic feedback. The purpose of the introduced design is to allow prototype to be built into the aeroplane so that the proposed concept of haptic feedback can be tested onboard. It shall verify used technical solutions as well to allow for their application on following development stages that aim at certification of the proposed haptic feedback system to be used in general aviation aeroplanes. The designed components are the successors of prototypes used for experiments carried on flight simulator. The design process follows the requirements of legislation and outcomes of the previous experiments. This thesis follows the design process from setting of the design requirements to mechanical test of 3D printed prototypes.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401579 |
Date | January 2019 |
Creators | Dubnický, Lukáš |
Contributors | Jebáček, Ivo, Zikmund, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds