This master’s thesis describes design procedure of a heat-regulating system to stabilize its temperature using a Peltier module. The implementation uses eight-bit microcontroller ATmega16 made by company ATMEL for the local and remote control system. The temperature sensors communicate with the microcontroller by serial SPI interface. To display user data, it has a DEM16217SYH type character LCD display with HD44780 control circuit. To collect data from the cooling areas of Peltier module, accurate ADT7320 temperature sensors are used, made by company Analog Devices. The Control of the Peltier module happens in two points of the electrode system and a bistable hysteresis software regulator is used. The first part summarizes the theory, which concerns with the design. Next part concerned with issues of the Peltier module, overview of temperature sensors, description of the microcontroller, the display unit and the used regulator. Last part describes the hardware and software implementation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218821 |
Date | January 2011 |
Creators | Motl, Jakub |
Contributors | Trčka, Tomáš, Macků, Robert |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds