The addition of powered components for active assays into paper-based analytical devices opens new opportunities for medical and environmental analysis in resource-limited applications. Current battery designs within such devices have yet to adopt a ubiquitous circuitry material, necessitating investigation into printed circuitry for scalable platforms. In this study, a microfluidic battery was mated with silver-nanoparticle conductive ink to prototype an all-printed sensing platform. A multi-layer, two-cell device was fabricated, generating 200 μA of direct electrical current at 2.5 V sustained for 16 minutes with a power loss of less than 0.1% through the printed circuitry. Printed circuitry traces exhibited resistivity of 75 to 211 10-5 Ω m. Resistance of the printed traces increased upwards of 200% depending on fold angle and directionality. X-ray diffraction confirmed the presence of face-centered cubic silver after sintering printed traces for 30 minutes at 150°C in air. A conductivity threshold was mapped and an ink concentration of 0.636 μL mm-3 was identified as the lower limit for optimal electrical performance.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-2887 |
| Date | 01 December 2016 |
| Creators | Kripalani, Rishi A. |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses |
Page generated in 0.0023 seconds