In this research, a new technique for modeling periodic structures in the finite-difference time-domain (FDTD) method is developed, and the technique is applied to the study of structural color in insects.
Various recent supplements to the FDTD method, such as a nearly-perfect plane-wave injector and convolutional perfectly matched layer boundary condition, are used. A method for implementing the FDTD method on a parallel, distributed-memory computer cluster is given.
To model a periodic structure, a single periodic cell is terminated by periodic boundary conditions (PBCs). A new technique for incorporating PBCs into the FDTD method is presented. The simplest version of the technique is limited to two-dimensional, singly-periodic geometries. The accuracy is demonstrated by comparing to independent results calculated with a frequency-domain, mode-matching method.
The periodic FDTD method is then extended to the more general case of three-dimensional, doubly-periodic problems. This extension requires additional steps and imposes new limitations. The computational cost and limitations of the method are presented.
Certain species of butterflies exhibit structural color, which is caused by quasi-periodic structures on the scales covering the wings. Numerical experiments are performed to develop a technique for modeling quasi-periodic structures using the periodic FDTD method. The observed structural color of butterflies is then calculated from the electromagnetic data using colorimetric theory.
Three types of butterflies are considered. The first type are from the Morpho genus. These are typically a brilliant, almost metallic, blue color. The second type is the Troides magellanus, which exhibits an interplay of structural and pigmentary color, but the structural color is only visible near grazing incidence. The final type is the Ancyluris meliboeus, which exhibits iridescence on the ventral side. For all cases, the effects of changing the dimensions of various structural elements are considered.
Finally, some earlier work on the design of TEM horn antennas is presented. The TEM horn is a simple and popular antenna, but only limited design information is available in the literature. A parametric study was performed, and the results are given. A complete derivation of the characteristic impedance of the basic antenna is also presented.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/29772 |
| Date | 29 May 2009 |
| Creators | Lee, Richard Todd |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Dissertation |
Page generated in 0.0019 seconds