Although foam has been widely used in many scientific and engineering applications, the current understanding of foam rheology in pipes is still very limited because of its complex nature. This experimental study, for the first time, investigates the flow rheology of foams in pipes by placing a special emphasis on two distinct foam flow regimes.
A wide range of experimental conditions are examined in this study, which include five different surfactant formulations (Cedepal FA-406, Petrostep CG-50, Stepanform 1050, Aquet TD-600, and Ultra-Palmolive), three different surfactant concentrations (0.1, 1, and 5 wt %), two different pipe diameters (0.5 and 1 inch nominal size stainless steel pipes), and two different filter opening sizes (50 and 90 micrometers) for upstream foam generation.
The experiments revealed the following characteristics: (1) foam flow in pipes exhibited two different flow regimes called high-quality regime and low-quality regime, (2) the high-quality regime was characterized by unstable and oscillating pressure response which resulted from repeating free gas and foam slug, whereas the low-quality regime was characterized by stabilized pressure response which resulted from the flow of uniform and homogeneous foams, (3) different patterns of pressure contours were observed - the pressure contours were relatively steep in the high-quality regime but relatively gentle, or even almost horizontal, in the low-quality regime, (4) foam rheology in the high-quality regime was shear thickening to liquid injection velocity in all cases, and foam rheology in the low-quality regime was not consistent, and (5) the value of foam quality (fg*) that splits the two flow regimes was shown to be affected by experimental conditions such as surfactant formulations and concentrations.
These observations imply that the rheology in the high-quality regime is primarily governed by dynamic mechanisms of lamella creation and coalescence during the flow, and the rheology in the low-quality regime is primarily governed by interactions between bubbles and/or interactions between bubbles and pipe wall. Therefore, the high-quality regime is likely to expand (or, the low-quality regime is likely to contract, equivalently) with a reduction in surfactant foamability.
Implications of distinct foam behaviors in two flow regimes in practical applications are also discussed.
| Identifer | oai:union.ndltd.org:LSU/oai:etd.lsu.edu:etd-06292008-165012 |
| Date | 30 June 2008 |
| Creators | Bogdanovic, Miodrag |
| Contributors | John Rogers Smith, Richard Hughes, Seung Ihl Kam |
| Publisher | LSU |
| Source Sets | Louisiana State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lsu.edu/docs/available/etd-06292008-165012/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached herein a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to LSU or its agents the non-exclusive license to archive and make accessible, under the conditions specified below and in appropriate University policies, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0022 seconds