Return to search

Waveform Design For Pulse Doppler Radar

ABSTRACT


WAVEFORM DESIGN FOR PULSE DOPPLER RADAR

AgIRMAN, Handan

M.S., Department of Electrical and Electronics Engineering
Supervisor: Prof. Dr. Mete Severcan

December 2005, 100 pages



This study is committed to the investigation of optimum waveforms for a pulse doppler radar which uses a non linear high power amplifier in the transmitter. The optimum waveform is defined as the waveform with the lowest peak and integrated side lobe level, the narrowest main lobe in its autocorrelation and the narrowest bandwidth in its spectrum.

The Pulse Compression method is used in radar systems since it is more advantageous in terms of the resolution. Among all pulse compression methods, the main focus of this study is on Phase Coding. Two types of radar waveforms assessed throughout this study are Discrete Phase Modulated Waveforms and Continuous Phase Modulated Waveforms. The continuous phase modulated waveforms are arranged under two titles: the memoryless phase modulated waveform and the waveform modulated with memory.


In order to form memoryless continuous phase waveforms, initially, discrete phase codes are obtained by using Genetic Algorithm. Following this process, a new phase shaping pulse is defined and applied on the discrete phase waveforms.

Among the applicable modulation with memory techniques, Continuous Phase Modulation maintains to be the most appropriate. The genetic algorithm is used to find different lengths of optimum data sequences which form the continuous phase scheme.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/2/12606840/index.pdf
Date01 December 2005
CreatorsAgirman, Handan
ContributorsSevercan, Mete
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for METU campus

Page generated in 0.0016 seconds